Programming your One For All remote
How to Program your One For All® remote
(Models URC-2000, URC-2075, URC - 2085)
Set Up
After getting the proper codes from your manual or Customer Service, use the following instructions to enter them into your remote.
- Press the device you want to program, then release.
- Press A, then B, then C.
- Enter your 3 digit code.
- You should receive 2 quick flashes after entering your code.
Reading The Blink Code
Press A - device (i.e. TV,VCR,etc),
Then press 1 and count the blinks on the remote (1st digit),
Press 2 and count the blinks (2nd digit).
Press 3 and count the blinks (3rd digit).
NO BLINKS = 0
These three numbers make up your setup code.
Redefining A Device Button
The remote allows the user to assign a TV to the VCR or CABLE button.
You can assign any combination of devices to different buttons.
Press A - B - C - 9 - 9 - 9 - DEVICE 1 - DEVICE 2
Then press:
DEVICE 1 - A - B - C - SET UP CODE
Example: Let's change the Cable button to a TV button.
A - B - C - 9 - 9 - 9 - CABLE - TV
We can then assign a TV to the Cable button.
CABLE - A - B - C - 017
Clearing Out A Device Button
Press A - B - C - 9 - 9 - 9 - DEVICE KEY - DEVICE KEY.
Example: A - B - C - 9 - 9 - 9 - TV - TV
Punch Through
Punch Through allows you to operate functions from one device while using another
one. For instance- if your are using a VCR with out volume- you can get the TV volume without
changing devices keys. Use this procedure to Punch Through a function:
- Press the DEVICE button you want the function on.
- Press A - B - C - 9 - 9 - 9 - the DEVICE you want -the Function you want .
- The green light will blink twice.
(i.e. To get the volume from the TV in the CABLE mode: TV - A - B - C - 9 - 9 - 9 - CABLE - VOLUME+)