From: Susan Smith Sent: September-15-10 9:14 AM To: danf@radialeng.com Subject: push switches Dan, Here is the info on the three push switches we use form Taiwan Alpha and that we have in stock at Radial. R800 9007 00 shorting latching type switch (has a red mark on the top) R800 9022 00 non-shorting latching type switch (has a blue mark on the top) R900 9032 00 shorting momentary type switch (has a black mark on the top) These are all the same footprint and look the same other than the color identifier from a physical standpoint. So on your Power Pre BOM the switch is still showing conflicting info. It asks for a non shorting switch but is referring to the part number for the shorting type. Since the Power Pre has just a couple of “Radial” supplied parts I am not going to bother sending them to them we can just put on here, there is only the toggle switch, push switch and Hammond transformer and the pot which the value still needs to be determined. On the meter card it is only the LED array that we can put on here. Thanks Susan Smith Radial Engineering Ltd. Purchasing Manager 604-942-1001 x 231 www.radialeng.com